Drain Line Cleaning and Inspection Support
Location: Calgary, AB
Project Type: Commercial Facility Maintenance
Industry: Commercial / Mechanical
Customer Type: Mechanical Contractor
Project Overview
DIGS Hydrovac was called by a mechanical contractor in Calgary to clean and inspect a drain line at a commercial facility. The line sat beyond the reach of the hydrovac unit, so the job called for 150 feet of remote hose to access it, flush it clear, and confirm its condition with a camera inspection, all in a single mobilization.
Scope of Work
DIGS Hydrovac provided:
Remote Hose Deployment and Setup
High-Pressure Drain Line Flushing
Camera Scope Inspection
Drain Clean Out and Waste Removal
Site Conditions
The drain line was well beyond the hydrovac unit's reach, requiring a 150-foot remote hose run to access the work area. Crews maintained safety zones around the hose throughout the job and coordinated positioning to keep noise and disruption to a minimum, allowing the facility to continue operating normally.
Execution
DIGS Hydrovac rigged in the full 150-foot remote hose run to reach the drain line, flushed its entire length to clear accumulated material, then completed a camera scope inspection to confirm the line was clean and in good condition. All waste was removed and the crew returned to shop the same day.
Outcome
DIGS Hydrovac completed the drain line cleaning and inspection in a single half-day mobilization, giving the mechanical contractor a fully flushed and inspected line with no disruption to facility operations, demonstrating DIGS's ability to combine remote hose access with line jetting and camera inspection for mechanical contractors and facility managers across Calgary.